Description
Rubbing Compound – Coarse, Step 1 – Provides fast cut and leaves an excellent finish without swirl marks. This liquid compound and finishing material is designed to remove 600/800 wet sanding scratches from gelcoat. Use this with a buffer, followed by a coat of Sudbury Fine Compound.
Related
Directions
Shake well prior to use. Compound with a machine compounder at 1,500 to 2,000 RPM with a foam or wool buffing pad. Work in 2′ x 2′ ft areas. To reduce slinging, apply compound to an area being worked with a chip brush in an X pattern. Start compounder with a light pressure and as material dries, reduce pressure to polish surface. Repeat until all sanding/swirl marks are gone. Do not apply in direct sunlight. Remove spatter with damp cloth as soon as possible. Follow with an application of Sudbury® Finishing Compound to polish fiberglass to a high gloss.
Related